From April 27th to 29th, 2025, the China Forging Association successfully held the "2025 Forging Automation and Informatization Technology Seminar" at the Zhongyuan International Hotel in Xuchang, Henan. Nearly 300 renowned forging experts and enterprise elites from home and abroad gathered in Xuchang. Centered around the theme of "Moving towards High - end, Leading Intelligence, and Practicing Green Development", they presented a high - standard and high - value - added forging event for the industry. On April 28th, the conference grandly opened with a speech by Han Mulin, the vice chairman of the China Forging Association. Mr. Zhao Baojiang, the vice chairman of Xuchang Far East Transmission Shaft Co., Ltd. and the chairman of Zhongxing Forging, who is also from the conference's co - organizing unit, attended and delivered a welcome speech.    From April 28th to 29th, industry experts presented 14 wonderful professional reports. They discussed the changes and improvements in forging automation and informatization technologies over the past decade with the participating representatives and shared classic cases of enterprises' transformation and upgrading in the field of forging automation and informatization during this period.   On the morning of April 28th, hosted by Dr. Jiang Peng, an outstanding compound expert of China Academy of Machinery Science and Technology Group Co., Ltd. (CAM) and the chief expert of the China Forging Association's brainstorming expert database, the "Listen to Expert Insights・Anticipate Future Trends - High - end Interview Meeting" was successfully held.  

From May 7th to 9th, 2025, the "2025 China Pipe and Pipe Fittings Forming Conference and the Meeting of the Pipe Forming Working Committee" was successfully held in Hefei, Anhui. The conference was sponsored by the China Forging Association, organized by Forging & Stamping Magazine Co., Ltd., and co-organized by Anhui Siming Automotive Technology Co., Ltd., Anhui Academy of Sciences and Experts Federation, Anhui Forging Association, Anhui Automobile Industry Association, Anhui Scientists and Entrepreneurs Association, and Anhui Foundry Association.   This conference was a grand industry event integrating industry reports, technical lectures, special seminars, and experience sharing. Its aim was to build industry consensus and jointly explore new development paths for the industry. The conference achieved fruitful results, with nearly a hundred representatives in attendance, including local government representatives, experts and scholars from outstanding scientific research institutions, elites from automotive OEMs, pipe processing and other parts production enterprises, suppliers, and related enterprises across the country.   The conference officially began at 8:50 am on May 8th. Song Zhongping, the deputy secretary-general of the China Forging Association, delivered the opening speech, and Yu Dongliang, the general manager of Anhui Siming Automotive Technology Co., Ltd., extended a warm welcome to all participants.   During the conference, there were a series of keynote speeches: "Digital Manufacturing Strategies and Applications for Metal Pipes" by Xu Yong, a research fellow at the Institute of Metal Research, Chinese Academy of Sciences and the executive director of the Pipe Forming Working Committee of the China Forging Association. The speech introduced the importance of aerospace pipelines in systems such as the hydraulic system, fuel system, lubricating oil system, and e

Recently, the "2025 Forging Die Life Improvement Training Workshop" hosted by the China Forging Association successfully concluded in Taicang. The three-day training workshop attracted nearly 60 enterprise representatives and technical backbones from more than 40 parts and components enterprises and their supporting enterprises across the country. They gathered together to enhance their professional skills.   This training focused on the "Full-life Cycle Optimization Technology of Forging Dies", aiming to help enterprises improve their professional level in this field through a concentrated and efficient learning model. Four front-line technical experts from outstanding domestic enterprises were invited as instructors. Starting from actual production, they deeply analyzed the causes of die failures, proposed practical countermeasures, and systematically sorted out the difficult and hot issues in the die field.  

From June 15th to 18th, 2025, the "2025 China Forging Conference - National Forging Enterprise Directors' Meeting", organized by the China Forging Association, will be grandly held at Buckingham Palace Hotel (Xiangcheng, Suzhou). With the theme of "Accelerating Digital Transformation and Achieving Green Manufacturing", this conference will gather more than 400 participants, set up over 30 small booths, arrange more than 20 wonderful reports, and will also host the China International Metalforming Exhibition simultaneously, undoubtedly becoming the annual event of the forging industry. The conference is full of highlights, closely following the national policy trends. In the final year of the "14th Five-Year Plan", participants can comprehensively understand policies, technologies, and cases, and accurately grasp the high - quality development direction of the forging industry. More than 20 special reports will focus on the core topics of the industry's "Four Modernizations" development, covering hot fields such as high - end forming technology, intelligent factories, green and low - carbon, and the integration of industry and finance. Leading enterprises will also share practical experiences in digital upgrading, helping the industry transform from "manufacturing" to "intelligent manufacturing". In addition, participants will visit Jiangsu Hongbao Forging Co., Ltd., a national specialized and sophisticated "little giant" enterprise, to observe intelligent production lines and green processes, and learn advanced manufacturing models through immersive learning. During the conference, more than 300 enterprise decision - makers will gather, enabling precise connection between upstream and downstream of the industrial chain. This not only expands high - end networking resources but also explores new cooperation opportunities, join

The "2025 China Pipe and Pipe Fitting Forming Conference and Pipe Forming Working Committee Meeting" hosted by the China Forging Association will be grandly held in Hefei, Anhui Province from May 7th to 9th, 2025.   Pipe fittings are widely used in many fields such as aviation, aerospace, shipbuilding, automotive, energy, petrochemical, nuclear power, and electronics. They are key lightweight components with both structural and functional utilities, and are used in large quantities and wide applications. With the rapid development of the global manufacturing industry and continuous technological progress, the demand for high-performance pipe fittings in these fields is increasing day by day. However, despite significant technological advancements, the industry still faces many challenges.   This seminar will focus on the cutting-edge development of pipe and pipe fitting forming technologies and industrial demands in fields such as automotive, home appliances, aerospace, and nuclear power. It will deeply explore industry trends, technological innovations, and cross - field collaboration solutions around core topics such as lightweight materials, advanced forming processes (such as internal high - pressure forming, laser welding, flexible pipe bending, etc.), intelligent detection, and quality control. Through the sharing of industry - academia - research experts, case analysis, and technology prospects, it aims to promote the efficient application of high - performance pipe fittings in complex scenarios and help the industry accelerate its upgrading towards the direction of green, precision, and intelligent development.

On March 12, 2025, the 9th Working Conference of the Directors Committee for Stamping, Sheet Metal Fabrication, Fine Blanking, Precision High-Speed Stamping, and Head Forming of the China Forging & Press Association (CFPA) was successfully held in Wuxi, Jiangsu Province. This working conference was hosted by Wuxi Wei Yan Co., Ltd., the rotating director unit of CFPA’s Precision High-Speed Stamping Committee, and co-organized by Jiangsu Pengde Industrial Technology Co., Ltd., the rotating chairman unit of CFPA and the rotating director unit of the Stamping Branch.   Out of the 19 invited units, 15 attended the meeting, while 4 were excused due to unavoidable reasons. A total of 22 representatives participated in person. The conference was chaired by Qi Junhe, Vice Chairman of CFPA and Executive Director of the Five Industry Branches/Working Committees. Zhu Yuanhua, Deputy General Manager of Wuxi Wei Yan Co., Ltd., delivered a welcome speech on behalf of Chairman Cai Leiming. Chairman Tan Weiguang, representing CFPA, delivered an important address.   Song Zhongping, Deputy Secretary-General of CFPA and Secretary-General of the Stamping and Sheet Metal Fabrication Branch, presented a report on behalf of the CFPA Secretariat, summarizing the association’s work in the metal sheet forming industry in 2024 and outlining the 2025 plan. He also introduced the preparations for CFPA’s major 2025 event—the "September Festival" of China’s forging and stamping industry in Shanghai, with a special focus on the 2025 China International Metal Forming Exhibition & Conference. Jia Ruipeng, from CFPA’s Industry Research Office & Brainstorming Expert Service Center, provided a detailed explanation of the leadership group, drafting team, framework, requirement

From January 8 to 10, 2025, the "2025 China Forging Blanking & Machining Technology Seminar and Matchmaking Exchange Conference—2025 Forging Blanking Equipment Technology Committee Meeting of China Forging & Press Association (CFPA) and Preparatory Meeting for CFPA’s Forging Machining Technology Committee," organized by the China Forging & Press Association (CFPA), was successfully held in Wuxi, Jiangsu Province. Nearly 100 representatives from over 50 companies across various regions attended the event. The primary objective of the conference was to facilitate in-depth exchanges between forging component manufacturers and equipment suppliers specializing in blanking and machining. Discussions focused on sharing experiences in equipment selection, usage, management, maintenance, and upkeep, as well as exploring future development trends in forging blanking and machining processes. The event aimed to help enterprises clarify their positioning, strategize for growth, and drive industrial upgrading.   Han Mulin, Vice Chairman of CFPA, attended the conference and delivered the opening speech. Song Zhongping, Deputy Secretary-General of CFPA, presided over the meeting. Miao Lei, Assistant General Manager of Jiangyin Quanhuafeng Precision Forging Co., Ltd. (a CFPA council member), extended a welcome address and presented a report titled "Application of Intelligent Raw Material Storage and Automated Blanking Technology," emphasizing the importance of automated blanking management. Numerous industry experts and enterprise representatives also delivered technical presentations.   During the event, attendees engaged in on-site discussions on forging blanking and machining technologies, as well as the establishment of the Forging Machining Technology Committee and the formulation o